Skip to main content
Version: 6.2

PHP security release (November 2026)

Security update for every VirtFusion control server and hypervisor

PHP 8.3.37 fixes 13 security vulnerabilities in PHP. VirtFusion runs on its own PHP packages, so every control server and every hypervisor should be updated to PHP 8.3.37. The updated packages are available now for every supported system, on x86_64 and AArch64 (ARM). See Package status below, then update with the steps in Remediation.

Summary​

FieldDetail
ComponentPHP, as shipped in VirtFusion's vf-php8 and vf-system-php8 packages
SeverityPHP rates the highest severity in this release as Critical, for issues that need a non-default configuration or an uncommon setup
DetailsPublished by the PHP project on 19 November 2026
Fixed inPHP 8.3.37
VirtFusion packagesvf-php8 and vf-system-php8 8.3.37-1
Where it appliesControl servers (vf-php8) and hypervisors (vf-php8 and vf-system-php8), on every VirtFusion version

Which vulnerabilities apply to VirtFusion​

We have checked each advisory against VirtFusion's PHP build and configuration.

CVEVulnerabilityApplies to VirtFusion
CVE-2026-129291PHP-FPM use-after-free that lets code already running in a PHP worker gain the privileges of the PHP-FPM master (High)Yes
CVE-2026-129496Timezone cache use-after-free that can lead to remote code execution (Critical)Possibly. It depends on conditions at PHP startup that we cannot rule out.
CVE-2026-129289PHP-FPM request smuggling (Critical)No. It needs persistent FastCGI connections, which VirtFusion's web server does not use.
CVE-2026-126714, CVE-2026-115560, CVE-2026-129481Three PHP session vulnerabilities (Critical)No. VirtFusion does not use PHP's own sessions.
CVE-2026-129506, CVE-2026-15353SOAP extensionNo. The extension is not included.
CVE-2026-129538PHP-CGINo. VirtFusion uses PHP-FPM.
CVE-2026-129292PHP-FPM status page cross-site scriptingNo. The status page is not enabled.
CVE-2026-128090, CVE-2026-128064, CVE-2026-127960Phar signatures and the HTTP and FTP stream wrappersNot in normal use.

Update even though most of these do not apply: the two at the top do or may.

Am I affected?​

Yes, unless the server is already running VirtFusion's PHP 8.3.37 packages. Check the version VirtFusion runs:

/opt/virtfusion/php8/bin/php -v | head -n 1
# On a hypervisor, also:
/opt/virtfusion/system/php8/bin/php -v | head -n 1

Any version below 8.3.37 is affected.

Package status​

These are the packages in the update. All of them are in the VirtFusion repository; install them with the steps in Remediation.

PackageVersionSystemsArchDistributionStatus
vf-php88.3.37-1Control, Hypervisorx86_64Debian 13, Debian 12, Debian 11, Ubuntu 24.04, Ubuntu 22.04, RHEL 10, RHEL 9, RHEL 8✅ Available
vf-system-php88.3.37-1Hypervisorx86_64Debian 13, Debian 12, Debian 11, Ubuntu 24.04, Ubuntu 22.04, RHEL 10, RHEL 9, RHEL 8✅ Available
vf-php88.3.37-1HypervisorAArch64Debian 13, Debian 12, RHEL 10✅ Available
vf-system-php88.3.37-1HypervisorAArch64Debian 13, Debian 12, RHEL 10✅ Available

RHEL means RHEL itself and the distributions built from it, such as AlmaLinux and Rocky Linux. A control server needs vf-php8; a hypervisor needs both.

Remediation​

  1. Put VirtFusion into Maintenance Mode, so that no tasks are running while the services restart.
  2. Run the commands for your base distribution as root in SSH, on the control server and on every hypervisor. They install the updated packages and restart the services that use them.

For Debian 11, 12 and 13, and Ubuntu 22.04 and 24.04, on x86_64 and AArch64.

Control

apt-get update -y && apt-get install --only-upgrade vf-php8 -y
vfcli-ctrl app:restart --services=queue,fpm

Hypervisor

apt-get update -y && apt-get install --only-upgrade vf-php8 vf-system-php8 -y
vfcli-hv app:restart --services=queue,system-fpm,fpm
  1. Confirm PHP reports the new version:
/opt/virtfusion/php8/bin/php -v | head -n 1
# On a hypervisor, also:
/opt/virtfusion/system/php8/bin/php -v | head -n 1

Both should report PHP 8.3.37.

  1. Take VirtFusion out of Maintenance Mode once every system has been updated.

Timeline​

DateEvent
2026-11-18The PHP project announces a security release, due 19 November between 14:00 and 14:30 UTC
2026-11-19PHP 8.3.37 released, with advisories for 13 vulnerabilities
2026-11-19VirtFusion 8.3.37 packages published for x86_64
2026-11-19VirtFusion 8.3.37 packages published for AArch64 Debian 12 and 13
2026-11-19VirtFusion 8.3.37 packages published for AArch64 RHEL 10; every package in the update is available

References​